Nasal Prongs

ST-072 13 mm (1/2″) Indicator Tape 36 Rolls/Case ST-048 19 mm (3/4″) Indicator Tape 24 Rolls/Case ST-036 25 mm (1″) Indicator Tape 18 Rolls/Case BT-048 19 mm (3/4″) Blue Indicator Tape 24 Rolls/Case BT-036 25 mm (1″) Blue Indicator Tape 18 Rolls/Case LF2-048 19 mm (3/4″) Indicator Tape – Latex / Lead Free 24 Rolls/Case LF-036 25 mm (1″) Indicator Tape – Latex / Lead Free 18 Rolls/Case

Acrylic Canopy with front loading & 4 port Holes Removable sub assemblies like Baby Tray, Blower System Inlet for Oxygen, I.V. Tubing, Probes etc. Skin 250 C - 390 C Air 250 C - 390 C Safety Alarms (with Audio Visual message and Mute Facility): Skin Mode: High Temp. (> 10 C of set temperature) HI Low Temp. (< 10 C of set temperature) LO Over Temp. (> 380 C) Ovr Skin Probe fail Prb Air Mode: High Temp. (> 1.50 C of set temperature) HI Low Temp. (< -30 C of set temperature) LO Over Temp. (> 390 C) Ovr Skin Probe fail PRB Excellent access and sealing through gloves on port holes Humidity tray & Humidity Indication by Hygrometer Head Up/ Down Positioning Facility & Foam Mattress IV Stand Facility Mounted on heavy duty castors for easy mobility Fabrication in Mild Steel with Epoxy paint

Soft, flexible suction tip with length and shape designed to reduce potential harm to newborn. Reusable and can be sterilized with autoclaving or high-level disinfected with boiling or chemical disinfection. Detachable head for easy cleaning and visual inspection of suctioned matter and cleanliness. Made of high-grade silicone to withstand hundreds of uses. Ergonomic form for precise control. Stands upright and will not roll away. Can be sterilized by steam autoclaving at 136 °C, 10-20 minutes Can be high-level disinfected by following methods: Chemical disinfection with activated glutaraldehyde, per manufacturer recommendation Boiling in water, minimum 10 minutes

Hi Bright Blue LED Technology Spectral Irradiance > 35μ W/ cm2 nm brings superior intensity for faster curing No Ultra violet – No Skin rashes No Infrared – No Fluid loss/weight loss / Hyperthermia. This reduces the need for replenishing fluid loss in the newborn Totalizer timer (non resettable) for measuring lifetime LED usage Lower power consumption at 15W Long life LED at 50,000 hours At 50x30 cms, I REX 10 covers maximum base surface area of the newborn I REX 10s smaller bezels ensure that the overall size of the PT head is not too large to obstruct caretakers from their duties